Windows System Errors
Access is denied.
A network adapter hardware error occurred.
The local device name is already in use.
The storage control blocks were destroyed.
The device does not recognize the command.
The network resource type is not correct.
The environment is incorrect.
An attempt was made to load a program with an incorrect format.
The program issued a command but the command length is incorrect.
The network path was not found.
The network name cannot be found.
The specified server cannot perform the requested operation.
The remote adapter is not compatible.
The system cannot find the device specified.
The pipe has been ended.
The file name is too long.
The directory or file cannot be created.
Data error (cyclic redundancy check).
The directory cannot be removed.
The specified network resource or device is no longer available.
The program stopped because an alternate diskette was not inserted.
The disk is in use or locked by another process.
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
The exclusive semaphore is owned by another process.
Fail on INT 24.
The file exists.
The system cannot find the file specified.
A device attached to the system is not functioning.
The disk is full.
Reached the end of the file.
The access code is invalid.
Cannot request exclusive semaphores at interrupt time.
The storage control block address is invalid.
The data is invalid.
The system cannot find the drive specified.
Incorrect function.
The handle is invalid.
The parameter is incorrect.
The specified network password is not correct.
The process cannot access the file because another process has locked a portion of the file.
The specified network name is no longer available.
Network access is denied.
The network is busy.
A write fault occurred on the network.
The specified disk or diskette cannot be accessed.
Not enough storage is available to process this command.
The device is not ready.
The system cannot move the file to a different disk drive.
The request is not supported.
There are no more files.
The system cannot start another process at this time.
Space to store the file waiting to be printed is not available on the server.
The system cannot open the device or file specified.
Not enough storage is available to complete this operation.
The printer is out of paper.
Storage to process this request is not available.
The system cannot find the path specified.
The printer queue is full.
Your file waiting to be printed was deleted.
The system cannot read from the specified device.
The specified printer or disk device has been paused.
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
The drive cannot find the sector requested.
The drive cannot locate a specific area or track on the disk.
The semaphore is set and cannot be closed.
The previous ownership of this semaphore has ended.
Insert the diskette for drive %1.
Too many files opened for sharing.
The remote server has been paused or is in the process of being started.
The process cannot access the file because it is being used by another process.
The operation completed successfully.
The network BIOS command limit has been reached.
The name limit for the local computer network adapter card was exceeded.
The system cannot open the file.
Cannot create another system semaphore.
The semaphore cannot be set again.
The network BIOS session limit was exceeded.
An unexpected network error occurred.
The system cannot write to the specified device.
The media is write protected.
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
Access is denied.
A network adapter hardware error occurred.
The local device name is already in use.
The storage control blocks were destroyed.
The device does not recognize the command.
The network resource type is not correct.
The environment is incorrect.
An attempt was made to load a program with an incorrect format.
The program issued a command but the command length is incorrect.
The network path was not found.
The network name cannot be found.
The specified server cannot perform the requested operation.
The remote adapter is not compatible.
The system cannot find the device specified.
The pipe has been ended.
The file name is too long.
The directory or file cannot be created.
Data error (cyclic redundancy check).
The directory cannot be removed.
The specified network resource or device is no longer available.
The program stopped because an alternate diskette was not inserted.
The disk is in use or locked by another process.
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
The exclusive semaphore is owned by another process.
Fail on INT 24.
The file exists.
The system cannot find the file specified.
A device attached to the system is not functioning.
The disk is full.
Reached the end of the file.
The access code is invalid.
Cannot request exclusive semaphores at interrupt time.
The storage control block address is invalid.
The data is invalid.
The system cannot find the drive specified.
Incorrect function.
The handle is invalid.
The parameter is incorrect.
The specified network password is not correct.
The process cannot access the file because another process has locked a portion of the file.
The specified network name is no longer available.
Network access is denied.
The network is busy.
A write fault occurred on the network.
The specified disk or diskette cannot be accessed.
Not enough storage is available to process this command.
The device is not ready.
The system cannot move the file to a different disk drive.
The request is not supported.
There are no more files.
The system cannot start another process at this time.
Space to store the file waiting to be printed is not available on the server.
The system cannot open the device or file specified.
Not enough storage is available to complete this operation.
The printer is out of paper.
Storage to process this request is not available.
The system cannot find the path specified.
The printer queue is full.
Your file waiting to be printed was deleted.
The system cannot read from the specified device.
The specified printer or disk device has been paused.
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
The drive cannot find the sector requested.
The drive cannot locate a specific area or track on the disk.
The semaphore is set and cannot be closed.
The previous ownership of this semaphore has ended.
Insert the diskette for drive %1.
Too many files opened for sharing.
The remote server has been paused or is in the process of being started.
The process cannot access the file because it is being used by another process.
The operation completed successfully.
The network BIOS command limit has been reached.
The name limit for the local computer network adapter card was exceeded.
The system cannot open the file.
Cannot create another system semaphore.
The semaphore cannot be set again.
The network BIOS session limit was exceeded.
An unexpected network error occurred.
The system cannot write to the specified device.
The media is write protected.
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
Access is denied.
A network adapter hardware error occurred.
The local device name is already in use.
The storage control blocks were destroyed.
The device does not recognize the command.
The network resource type is not correct.
The environment is incorrect.
An attempt was made to load a program with an incorrect format.
The program issued a command but the command length is incorrect.
The network path was not found.
The network name cannot be found.
The specified server cannot perform the requested operation.
The remote adapter is not compatible.
The system cannot find the device specified.
The pipe has been ended.
The file name is too long.
The directory or file cannot be created.
Data error (cyclic redundancy check).
The directory cannot be removed.
The specified network resource or device is no longer available.
The program stopped because an alternate diskette was not inserted.
The disk is in use or locked by another process.
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
The exclusive semaphore is owned by another process.
Fail on INT 24.
The file exists.
The system cannot find the file specified.
A device attached to the system is not functioning.
The disk is full.
Reached the end of the file.
The access code is invalid.
Cannot request exclusive semaphores at interrupt time.
The storage control block address is invalid.
The data is invalid.
The system cannot find the drive specified.
Incorrect function.
The handle is invalid.
The parameter is incorrect.
The specified network password is not correct.
The process cannot access the file because another process has locked a portion of the file.
The specified network name is no longer available.
Network access is denied.
The network is busy.
A write fault occurred on the network.
The specified disk or diskette cannot be accessed.
Not enough storage is available to process this command.
The device is not ready.
The system cannot move the file to a different disk drive.
The request is not supported.
There are no more files.
The system cannot start another process at this time.
Space to store the file waiting to be printed is not available on the server.
The system cannot open the device or file specified.
Not enough storage is available to complete this operation.
The printer is out of paper.
Storage to process this request is not available.
The system cannot find the path specified.
The printer queue is full.
Your file waiting to be printed was deleted.
The system cannot read from the specified device.
The specified printer or disk device has been paused.
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
The drive cannot find the sector requested.
The drive cannot locate a specific area or track on the disk.
The semaphore is set and cannot be closed.
The previous ownership of this semaphore has ended.
Insert the diskette for drive %1.
Too many files opened for sharing.
The remote server has been paused or is in the process of being started.
The process cannot access the file because it is being used by another process.
The operation completed successfully.
The network BIOS command limit has been reached.
The name limit for the local computer network adapter card was exceeded.
The system cannot open the file.
Cannot create another system semaphore.
The semaphore cannot be set again.
The network BIOS session limit was exceeded.
An unexpected network error occurred.
The system cannot write to the specified device.
The media is write protected.
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.