Device Manager Errors

Code 1

This device is not configured correctly.

Code 10

This device cannot start.

Code 12

This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.

Code 14

This device cannot work properly until you restart your computer. (Code 14)

Code 16

Windows cannot identify all the resources this device uses.

Code 18

Reinstall the drivers for this device.

Code 19

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.

Code 21

Windows is removing this device.

Code 22

This device is disabled.

Code 24

This device is not present, is not working properly, or does not have all its drivers installed.

Code 28

The drivers for this device are not installed.

Code 29

This device is disabled because the firmware of the device did not give it the required resources.

Code 3

The driver for this device might be corrupted, or your system may be running low on memory or other resources.

Code 31

This device is not working properly because Windows cannot load the drivers required for this device.

Code 32

A driver (service) for this device has been disabled. An alternate driver may be providing this functionality.

Code 33

Windows cannot determine which resources are required for this device.

Code 34

Windows cannot determine the settings for this device.

Code 35

Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update.

Code 36

This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa). Please use the computer's system setup program to reconfigure the interrupt for this device.

Code 37

Windows cannot initialize the device driver for this hardware.

Code 38

Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.

Code 39

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

Code 40

Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly.

Code 41

Windows successfully loaded the device driver for this hardware but cannot find the hardware device.

Code 42

Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system.

Code 43

Windows has stopped this device because it has reported problems.

Code 44

An application or service has shut down this hardware device.

Code 45

Currently, this hardware device is not connected to the computer.

Code 46

Windows cannot gain access to this hardware device because the operating system is in the process of shutting down.

Code 47

Windows cannot use this hardware device because it has been prepared for safe removal, but it has not been removed from the computer.

Code 48

The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver.

Code 49

Windows cannot start new hardware devices because the system hive is too large (exceeds the Registry Size Limit).

Code 52

Windows cannot verify the digital signature for the drivers required for this device.